The recorder is dedicated to work with NOVUS 6000 series IP cameras. Detailed data can be found in the compatibility table available in the DOWNLOADABLE FILES tab.
The mobile application allows remote monitoring of the system based on the 6000 series recorders, via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- sabotage
- face recognition
The license plate recognition system based on the 6000 series recorder and NVIP-2H-6732M/LPR camera allows you to open the gate/barrier according to vehicle database. Each recognition is saved as a snapshot of the licence plate image (which is automatically linked to a fragment of the recording), which facilitates the subsequent verification of entries. The configuration of the camera, database and the search for license plates is done from the recorder and web browser.
The recorders in combination with the cameras of the same series, apart from the configuration of basic parameters such as contrast or brightness, allow for a much more advanced interference with the camera settings. Depending on the functionality of the camera, from the recorder level it is possible, among others:
- changing the network settings of the camera
- stream parameters setting
- setting the zoom and focus in a camera with a motor zoom lens
- enabling and configuring the image analysis function
The dynamic change of stream parameters allows for a significant saving of space for recording on the recorder's disks. This function frees us from the need to use recording after motion detection to ensure a long recording time, through operation in two modes: normal and alarm. When recording in the normal mode, we can set lower quality and fewer frames per second, while in the alarm full quality of the image. Thanks to this, we keep the continuity of the recording at the required recording length with full image quality for interesting parts recording
Smartplayback, or so-called post factum analysis allows the monitor's operator to search for recordings in coincidence with crossing lines or violating the area which we define at the time of playback recording. Thanks to this solution, the time needed to find a specific part of the recording is much more effective and less time-consuming.
Novus Management System VSS software is an advanced platform for managing video monitoring system. Novus Management System VSS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations
VCA (Video Content Analysis) features are a collection of techniques and algorithms that analyze and interpret video to detect threats, anomalies, or unwanted activities. VCA algorithms make it possible to detect and identify objects, analyze the movement of objects, including their tracking, but also allow, for example, face or license plate recognition. In thermal imaging cameras, VCA functions allow for early detection of fires.
The VCA in the cameras can operate automatically, without the need for human intervention, which enables a quick response to emergency situations.
The ONVIF standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the ONVIF standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.
The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
Application example:
- leaving luggage at train stations, metro stations
- places with a parking ban
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
Application example:
- protection of museum exhibits
The function allows to trigger a local alarm, send an e-mail, control the relay after detecting the face from the observed scene. The function will be used in places where due to high traffic it is not possible to use ordinary motion detection, and we want to register only fragments in which a human appears on the observed scene.
Application example:
- shops
- passage control (gates, tripods)
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after:
- covering the camera
- changing the scene of the camera (physical interference in the assembly)
- changing the focus settings (with cameras manually
adjustable focal length)
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
Application example:
- perimeter protection of the object
Video | |
---|---|
IP Cameras | up to 64 channels at 5520 x 2400 resolution (video + audio) |
Maximum Supported Camera Resolution | 5520 x 2400 |
Compression | H.264, H.265, H.265+, H.265 Smart |
Monitor Output | main (split screen, full screen, sequence): 1 x HDMI (8K UHDTV), 1 x VGA (up to 2 monitors simultaneously) spot: 2 x HDMI (4K Ultra HD), 1 x HDMI (FullHD) |
Dualstreaming Support | yes |
Fisheye Support | yes, 6000 IP series cameras using NVR, any web browser, N-VID6, N Control 6000 |
Audio | |
Audio Input/Output | 1 x line-in (RCA) / 1 x HDMI, 1 x line-out (RCA) |
Recording | |
Stream Size | 640 Mb/s in total from all cameras |
Recording Mode | continuous, triggered by: manual, alarm input, motion detection, intelligent image analysis functions |
Prealarm/Postalarm | up to 5 s/up to 600 s |
Display | |
Display Speed | 1920 fps (64 x 30 fps) |
Playback | |
Playback Speed | 480 fps (16 x 30 fps) |
Recorded Data Search | by date/time, events, image analysis events, POS, motion in a defined area, related to face recognition, tags, license plate number |
Backup | |
Backup Methods | USB port (HDD or Flash memory), network |
Backup File Format | MP4, AVI, RPAS (player included) |
Storage | |
Internal Storage | available mount: 8 x HDD 3.5” 14 TB SATA |
Total Internal Capacity | 112 TB |
External storage | 2 x eSATA |
Total External Capacity | 28 TB |
RAID Mode | RAID0, RAID1, RAID5, RAID6, RAID10 |
Alarm | |
Internal Alarm Input/Output | 16/4 relay type |
Camera Alarm Input/Output | supports IP camera’s alarm input/output |
Motion Detection | supports camera’s motion detection |
System Reaction to Alarm Events | buzzer, alarm output activation, recording activation, PTZ, e-mail with atatchment, Full Screen, PUSH message, voice prompt, snapshot |
Intelligent image analysis | |
Supported Functions | Exception, Scene Change, Video Blurred, Video Color Cast, Tripwire, Zone entrance, Abandoned Object, Object Disappearance, Face Detection, Face Recognition, Perimeter Intrusion Detection by pedestrian or vehicle, Line Cross Detection by pedestrian or vehicle, License Plate Recognition (LPR) |
Database Capacity | 10000 faces 50000 license plates |
Other parameters | face recognition for 16 NOVUS 6000 series IP cameras with 'F' in the model name or 4 ONVIF cameras |
Network | |
Network Interface | 2 x Ethernet - RJ-45 interface, 10/100/1000 Mbit/s |
Network Protocols Support | HTTP, TCP/IP, IPv4/v6, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, UPnP, SNMP, IEEE 802.1X, PPPoE, SMTP, P2P, POS, HTML5 |
PC/MAC Software | NOVUS MANAGEMENT SYSTEM VSS, NOVUS MANAGEMENT SYSTEM AC, NMS, Internet Explorer, Firefox, Chrome, Opera, N Control 6000, Edge/Safari, N Control 6000 |
Mobile applications | N-VID6 (iPhone, Android) |
Number of Simultaneous Connections | up to 128 clients, up to 68 main streams or 256 substreams or 32 playback streams in total |
Bandwidth | 640 Mb/s in total to all client workstations |
PTZ | |
PTZ Functions | pan/tilt/zoom, preset commands |
Auxiliary Interfaces | |
USB Ports | 2 x USB 2.0, 1 x USB 3.0 |
Operating system | |
Operating System | Linux |
OSD | languages: Polish, English, others |
Control | PC mouse and IR remote controller (in-set included), network |
System Diagnostic | automatic control of: HDDs, network, camera connection loss |
Security | password protection, IP filtering, MAC filtering, ARP guard |
Installation parameters | |
Dimensions (mm) | 445 (W) x 90 (H) x 436 (D) |
Weight | 6 kg (without HDD) |
Power Supply | 100 ~ 240 VAC |
Power Consumption | 150 W (with 8 HDDs) |
Operating Temperature | -10°C ~ 50°C |
RACK Mount 19" | 2U |