- Video surveillance system
- Alarm systems
- Access control
- Video intercoms
The recorder is dedicated to work with NOVUS 6000 series IP cameras. Detailed data can be found in the compatibility table available in the DOWNLOADABLE FILES tab.
The license plate recognition system based on the 6000 series recorder and NVIP-2H-6732M/LPR camera allows you to open the gate/barrier according to vehicle database. Each recognition is saved as a snapshot of the licence plate image (which is automatically linked to a fragment of the recording), which facilitates the subsequent verification of entries. The configuration of the camera, database and the search for license plates is done from the recorder and web browser.
The mobile application allows remote monitoring of the system based on the 6000 series recorders, via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
- face recognition
The recorders in combination with the cameras of the same series, apart from the configuration of basic parameters such as contrast or brightness, allow for a much more advanced interference with the camera settings. Depending on the functionality of the camera, from the recorder level it is possible, among others:
- changing the network settings of the camera
- stream parameters setting
- setting the zoom and focus in a camera with a motor zoom lens
- enabling and configuring the image analysis function
The dynamic change of stream parameters allows for a significant saving of space for recording on the recorder's disks. This function frees us from the need to use recording after motion detection to ensure a long recording time, through operation in two modes: normal and alarm. When recording in the normal mode, we can set lower quality and fewer frames per second, while in the alarm full quality of the image. Thanks to this, we keep the continuity of the recording at the required recording length with full image quality for interesting parts recording
Smartplayback, or so-called post factum analysis allows the monitor's operator to search for recordings in coincidence with crossing lines or violating the area which we define at the time of playback recording. Thanks to this solution, the time needed to find a specific part of the recording is much more effective and less time-consuming.
NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations
VCA (Video Content Analysis) features are a collection of techniques and algorithms that analyze and interpret video to detect threats, anomalies, or unwanted activities. VCA algorithms make it possible to detect and identify objects, analyze the movement of objects, including their tracking, but also allow, for example, face or license plate recognition. In thermal imaging cameras, VCA functions allow for early detection of fires.
The VCA in the cameras can operate automatically, without the need for human intervention, which enables a quick response to emergency situations.
The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.
The video encoding standard, which is the successor to the H.264 standard, which allows to save up to 35% of the bandwidth.
A function that performs the counting of a defined line crossing, distinguishing the direction of a moving object. The function can be used to create statistics of visits to any public facilities.
- counting the number of visitors to the selected store depending on days / week
Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.
The function allows to trigger a local alarm, send an e-mail, activate the relay after detecting the formation of people's communities from the observed scene. The function can be used in city monitoring.
- monitoring public space, including markets, squares
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
- leaving luggage at train stations, metro stations
- places with a parking ban
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
- protection of museum exhibits
The function allows to trigger a local alarm, send an e-mail, control the relay after detecting the face from the observed scene. The function will be used in places where due to high traffic it is not possible to use ordinary motion detection, and we want to register only fragments in which a human appears on the observed scene.
- passage control (gates, tripods)
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after violating the limits of the defined detection zone (up to 4 detection zones).
- perimeter protection of the object
- protection of strategically important objects
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after:
- covering the camera
- changing the scene of the camera (physical interference in the assembly)
- changing the focus settings (with cameras manually
adjustable focal length)
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
- perimeter protection of the object
up to 8 channels at 3840 x 2160 resolution (video + audio)
|Maximum Supported Camera Resolution|
3840 x 2160
H.264, H.265, H.265+, H.265 Smart
main (split screen, full screen, sequence): 1 x VGA, 1 x HDMI (4K UltraHD) (up to 2 monitors simultaneously)
yes, 6000 IP series cameras
using Internet Explorer, SuperLive Plus, N Control 6000
1 x line-in (RCA) / 1 x HDMI, 1 x line-out (RCA)
80 Mb/s in total from all cameras
continuous, triggered by: manual, alarm input, motion detection, intelligent image analysis functions
up to 5 s/up to 600 s
240 fps (8 x 30 fps)
240 fps (8 x 30 fps)
|Recorded Data Search|
by date/time, events, image analysis events, POS, motion in a defined area, tags
USB port (HDD or Flash memory), network
|Backup File Format|
MP4, AVI, RPAS (player included)
available mount: 1 x HDD 3.5” 10 TB SATA
|Total Internal Capacity|
|Camera Alarm Input/Output|
supports IP camera’s alarm input/output
supports camera’s motion detection
|System Reaction to Alarm Events|
buzzer, alarm output activation, recording activation, PTZ, e-mail with atatchment, Full Screen, PUSH message, voice prompt, snapshot
|Intelligent image analysis|
Exception, Scene Change, Video Blurred, Video Color Cast, Tripwire, Zone entrance, Abandoned Object, Object Disappearance, Crowd detection, Face Detection, People Counting, Perimeter Intrusion Detection by pedestrian or vehicle, Line Cross Detection by pedestrian or vehicle, Analysis of Recognized Number Plate Numbers (LPR)
1 x Ethernet - RJ-45 interface, 10/100/1000 Mbit/s
8 x Ethernet PoE (IEEE802.3af, Class 3) - RJ-45 interface, 10/100 Mbit/s
|Network Protocols Support|
HTTP, TCP/IP, IPv4/v6, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, UPnP, SNMP, PPPoE, SMTP, P2P, POS, HTML5
|ONVIF Protocol Support|
Profile S (ONVIF 2.2 or higher)
NMS, Internet Explorer, Firefox, Chrome, Opera, N Control 6000, Edge/Safari, N Control 6000
SuperLive Plus (iPhone, Android)
|Number of Simultaneous Connections|
up to 5 clients, up to 12 main streams or 32 substreams or 8 playback streams in total
80 Mb/s in total to all client workstations
pan/tilt/zoom, preset commands
2 x USB 2.0
languages: Polish, English, others
IR remote controller, PC mouse (in-set included), network
automatic control of: HDDs, network, camera connection loss
password protection, IP filtering, MAC filtering
300 (W) x 52 (H) x 248 (D)
1.16 kg (without HDD)
100 ~ 240 VAC
20 W (with 1 HDD) + 100 W PoE
-10°C ~ 50°C
|Image analysis - camera installation guidelines_wskazówki instalacji kamer_EN_PL_v1.0.pdf||User manual||1.12 MB|
|NVR-6000_series_FULL_EN_PL_v1.2(up to 1.3.4).pdf||User manual||10.7 MB|
|NVR-6000_series_FULL_EN_PL_v2.2(1.4.1).pdf||User manual||31.62 MB|
|NVR-6000_series_FULL_EN_PL_v3.2(1.4.4).pdf||User manual||34.21 MB|
|NVR-6000_v184.108.40.206_EN_PL.pdf||User manual||6.74 MB|
|N_CONTROL_6000_EN_PL_1.2.1.pdf||User manual||5.4 MB|
|VCA_6000VSS_PL Instrukcja konfiguracji i obsługi funkcji analizy obrazu kamer Novus serii 6000 VSS.pdf||User manual||4.24 MB|
|NVR6000 rekomendacja bezpieczeństwa.pdf||Installation and Maintenance Manual||1.5 MB|
|N Control 6000 x64 Ver220.127.116.1130.exe.zip||Software||430.94 MB|
|N Control 6000_ver18.104.22.16830.pkg_.zip||Software||118.35 MB|
|PoE standards overview_Porównanie standardów PoE_EN_PL_v1.0.pdf||Others||710.61 KB|
|NVR, NHDR with IP cameras compatibility_Kompatybilnosc rejestratorow i kamer IP_8.03.2023.xlsx||Compatibility table||296.42 KB|
|NVR-6000_NVR-7000_NHDR-6000_Lista_dyskow_HDD_compatible_list_2022.09.20.xls||Compatibility table||180 KB|