INGENIUS PLUS - a new generation of intelligent image analysis based on Deep Learning. The algorithm used allows the camera to recognize the shape of a human, a car and bike/motorcycle, even as small as 1% of the stage. The efficiency of the analysis methods used allows simultaneous classify and monitoring of up to 32 objects of different types.

Image analysis based on Deep Learning enabling the counting of objects with recognized shapes (human, a car and bike/motorcycle) that crossed the virtual line. The camera can display the number of these objects in the image.

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object (human, car or bike/motorbike has crossed the previously defined detection zone.
Application example:
- perimeter protection of the object
- protection of strategically important objects

The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object (human, car or bike/motorbike has crossed the previously defined line (maximum 4 lines per one camera).
Application example:
- perimeter protection of the object

Improved video stream encoding type based on creating virtual base frames, and dynamic realocate bits in stream structure. The algorithm allows 30% bandwidth saving compared to H.265 +, up to 50% compared to H.265. 

Image analysis function based on Deep Learning, allows to detect the faces of people in the detection zone. After detecting a face, the camera can trigger an alarm or, if it is connected to a recorder with the face recognition function, it can send data allowing for the identification of the detected face.

The recorders in combination with the cameras of the same series, apart from the configuration of basic parameters such as contrast or brightness, allow for a much more advanced interference with the camera settings. Depending on the functionality of the camera, from the recorder level it is possible, among others:
- changing the network settings of the camera
- stream parameters setting
- setting the zoom and focus in a camera with a motor zoom lens
- enabling and configuring the image analysis function
 

The mobile application allows for remote monitoring of a system based on 6000 (old 3000) series cameras, via a smartphone with Android or iOS. Basic camera configuration as well as PTZ control are available from the phone. Connection of the camera with the application does not require the use of a recorder (local network, port forwarding)

The camera equipped with an SD card slot allows local recording of video material, so it is resistant to possible interference in the transmission of data between the camera and the recorder. Playback and export of saved material can be done from the level of the web browser.

Novus Management System VSS software is an advanced platform for managing video monitoring system. Novus Management System VSS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations

The ONVIF standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the ONVIF standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.

The IK scale is used to determine the degree of protection against equipment impact, including camera casings used in monitoring. The highest level of IK scale is "IK10" means that the camera is resistant to impacts with a strength of 20J, which translates into the equivalent of the fall of the object weighing 5kg from a height of 40cm.

Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.