- Video surveillance system
- Alarm systems
- Access control
- Video intercoms
The recorder is dedicated to work with NOVUS 4000 series IP cameras. Detailed data can be found in the compatibility table available in the DOWNLOADABLE FILES tab.
The mobile application allows for remote monitoring of a system based on 4000, AHD and Wi-Fi recorders via a smartphone with Android or iOS. The basic configuration of the recorder and cameras as well as PTZ control are available from the phone. The application allows you to connect to the recorder via P2P using a QR code, without the need for additional network configuration. In addition, it allows you to receive push alarms for selected alarm actions such as:
- crossing the line
- intrusion into the zone
4000 Series recorders are able to receive a message about the detection of a moving object by a PIR detector built into the front panel of the camera. A passive infrared detector allows us to eliminate false motion detections caused by eg:
- lights of passing cars
- shadow movements
- reflections from shiny surfaces
- leaves / trees movement in the wind
The principle of operation of the PIR detector is based on the detection of heat changes in the detection zone, therefore the alarm is generated only when a human or other object that differs in temperature from the environment appears on the stage.
The camera uses HTML5 standard (programming language) to display the image in the browser.
This allows to configure and display stream from camera not only from Internet Explorer, but in all popular browsers, like Opera, Firefox, Edge or Chrome. Thanks to HTML5, the user can safely and conveniently connect to the camera, the high performance of HTML5 protocol allows to high definition video display without lag and with moderate consumption of computer resources.
The recorders in combination with the cameras of the same series, apart from the configuration of basic parameters such as contrast or brightness, allow for a much more advanced interference with the camera settings. Depending on the functionality of the camera, from the recorder level it is possible, among others:
- changing the network settings of the camera
- stream parameters setting
- setting the zoom and focus in a camera with a motor zoom lens
- enabling and configuring the image analysis function
Image analysis function based on Deep Learning, allows to detect the faces of people in the detection zone. After detecting a face, the camera can trigger an alarm or, if it is connected to a recorder with the face recognition function, it can send data allowing for the identification of the detected face.
A function that performs the counting of a defined line crossing, distinguishing the direction of a moving object. The function can be used to create statistics of visits to any public facilities.
- counting the number of visitors to the selected store depending on days / week
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after the object has crossed the previously defined line (maximum 4 lines per one camera).
- perimeter protection of the object
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after violating the limits of the defined detection zone (up to 4 detection zones).
- perimeter protection of the object
- protection of strategically important objects
NMS software (Novus Management System) is an advanced platform for managing video monitoring system. NMS can combine different standards of CCTV: Analog, AHD, IP, and at the same time is a software with a high degree of flexibility, finding its application in both small and large and distributed installations
VCA (Video Content Analysis) features are a collection of techniques and algorithms that analyze and interpret video to detect threats, anomalies, or unwanted activities. VCA algorithms make it possible to detect and identify objects, analyze the movement of objects, including their tracking, but also allow, for example, face or license plate recognition. In thermal imaging cameras, VCA functions allow for early detection of fires.
The VCA in the cameras can operate automatically, without the need for human intervention, which enables a quick response to emergency situations.
The Onvif standard allows for basic compatibility between devices from different manufacturers and brands. The camera + recorder set supporting the Onvif standard guarantees that the camera will be found, added, recorded and will transmit information about motion detection.
Improved coding standard allowing even more efficient use of the transmission bandwidth. The mechanism is based on the use of frame elements virtualization, which allows for the partial prediction of the recorded image, thus the overall packet traffic in the network is reduced.
Power over Ethernet - the technology allows you to power the IP camera directly from the recorder, without the need for additional power devices.
The function allows to trigger a local alarm, send an e-mail, control the relay, or send a push notification to the mobile application after detecting in the observed zone the detection of the object left for a specified time.
- leaving luggage at train stations, metro stations
- places with a parking ban
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after detecting the disappearance of the object in the designated detection zone.
- protection of museum exhibits
The function allows to trigger a local alarm, send an e-mail, control the relay after detecting the face from the observed scene. The function will be used in places where due to high traffic it is not possible to use ordinary motion detection, and we want to register only fragments in which a human appears on the observed scene.
- passage control (gates, tripods)
The function allows to trigger a local alarm, send an e-mail, activate the relay, or send a push notification to the mobile application after:
- covering the camera
- changing the scene of the camera (physical interference in the assembly)
- changing the focus settings (with cameras manually
adjustable focal length)
up to 4 channels at 3840 x 2160 resolution (video + audio)
|Maximum Supported Camera Resolution|
3840 x 2160
4000 x 3000 for fisheye cameras
H.264, H.264+, H.265, H.265+
main (split screen, full screen, sequence): 1 x VGA, 1 x HDMI (4K UltraHD) (up to 2 monitors simultaneously)
using Internet Explorer, RXCamView, NHDR-5000Viewer, N Control 4000
- / 1 x HDMI, 1 x line-out (RCA)
120 fps (4 x 30 fps for 3840 x 2160 and lower)
50 Mb/s in total from all cameras
continuous, triggered by: manual, alarm input, motion detection, face recognition, intelligent image analysis functions, PIR alarm
up to 3 s/up to 600 s
120 fps (4 x 30 fps)
120 fps (4 x 30 fps)
|Recorded Data Search|
by date/time, events, image analysis events, motion in a defined area, related to face recognition, tags
USB port (HDD or Flash memory), network
|Backup File Format|
JPG, BMP, PNG, MP4, AVI, RF
available mount: 1 x HDD 3.5” 8 TB SATA
|Total Internal Capacity|
network HDD (NFS or SMB/CIFS)
|Total External Capacity|
|Camera Alarm Input/Output|
supports IP camera’s alarm input/output
|System Reaction to Alarm Events|
buzzer, e-mail, alarm output activation, screen message, recording activation, PTZ, Full Screen, FTP picture upload, FTP video upload, picture to Cloud, video to Cloud, voice prompt
|Intelligent image analysis|
Exception, Tripwire, Zone entrance, Abandoned Object, Object Disappearance, Crowd detection, Face Detection, Face Recognition (in cooperation with selected 4000 series cameras), Pedestrian Detection, Cross Counting, Sound detection, Perimeter Intrusion Detection by pedestrian or vehicle, Line Cross Detection by pedestrian or vehicle, Objects Distinguishing, Queue Lenght Detection, Heat Map, Cross Counting by pedestrian or vehicle
1 x Ethernet - RJ-45 interface, 10/100 Mbit/s
4 x Ethernet PoE (IEEE802.3af, Class 3) - RJ-45 interface, 10/100 Mbit/s, with Extended mode
|Network Protocols Support|
HTTP, TCP/IP, IPv4/v6, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, UPnP, SNMP, PPPoE, SMTP, P2P, HTML5
NMS, Internet Explorer, NHDR-5000 Viewer, Firefox, Chrome, Opera, Edge, N Control 4000/Safari, NHDR-5000 Viewer
RxCamView (iPhone, Android)
|Number of Simultaneous Connections|
up to 32 users, each user up to 5 devices
48 Mb/s in total to all client workstations
pan/tilt/zoom, preset commands, patterns
2 x USB 2.0
languages: Polish, English, others
PC mouse and IR remote controller (in-set included), network
automatic control of: HDDs, network, camera connection loss
password protection, IP filtering
300 (W) x 53 (H) x 227 (D)
1.1 kg (without HDD)
48 VDC (100 ~ 240 VAC/48 VDC PSU in-set included)
20 W (with 1 HDD) + 45 W PoE
-10°C ~ 45°C
|NHDR5000Viewer_ENPL_1.0.pdf||User manual||5.76 MB|
|NVR-4000_full_ENPL_v.1.2.pdf||User manual||29.97 MB|
|NVR-4204P4-H1F-II_EN_PL_short_v.1.0.pdf||User manual||5.89 MB|
|RXCamView_ENPL_1.0_3.pdf||User manual||3.57 MB|
|Utworzenie i konfiguracja serwera samba na PC oraz konfiguracja rejestratora_EN_PL_v1.0.pdf||User manual||411.3 KB|
|CE_NOVUS NVR_4204P4_H1F-II-sig.pdf||Certificate||1.28 MB|
|N Control 4000_P2P(64)_2.8.62_2022_09_22.exe||Software||144.35 MB|
|NHDR-5000 Viewer_1.5.35_2020_07_14.exe||Software||25.28 MB|
|NHDR-5000 Viewer_1.5.38_2020_08_25_MAC.zip||Software||27.63 MB|
|NHDR and NVR4000 security recommendations rekomendacje bezpieczenstwa ENPL_3.pdf||Others||2.9 MB|
|PoE standards overview_Porównanie standardów PoE_EN_PL_v1.0.pdf||Others||710.61 KB|
|Wydajnosc NVR4000 performance 20230221.xlsx||Others||16.73 KB|
|NVR, NHDR with IP cameras compatibility_Kompatybilnosc rejestratorow i kamer IP_8.03.2023.xlsx||Compatibility table||296.42 KB|
|NVR-4000_AHD_WIFISET_Lista_dyskow_HDD_compatible_list_2020_10_20.xlsx||Compatibility table||17.45 KB|